FOB Price
Get Latest Price5000 / Set
|1 Set Minimum Order
Country:
China
Model No:
SHMG14091TRADEKEY
FOB Price:
5000 / Set Get Latest Price
Place of Origin:
-
Price for Minimum Order:
5000 per Set
Minimum Order Quantity:
1 Set
Packaging Detail:
Standard package suitable for shipment
Delivery Time:
35DAYS
Supplying Ability:
100 Set per Week
Payment Type:
-
Product Group :
Contact Person sievo05151631-cn.shanghaimg1.092828
No.33 Shenxia Road, Malu Industrial Park, Jiading District, Shanghai,China, Shanghai, Shanghai
Powder Concentrator is mainly used for raw meal&clinker
classifying and setting up close-circuit grinding system with ball
mill. It is widely used in powder process, cement, chemical,
metallurgical and other industries. Trough continuous technical
improvement and proved by practical use, these kinds of powder
concentrator are good in material distribution,
reliable&convenient in adjusting fineness, high efficient in
separating, convenient in installation, easy to maintain
,etc.
Powder Concentrator Introduction:
T-Sepax high-efficiency three-classification powder concentrator is
the latest high-tech product, which is developed by our company
adopting aviation aerodynamics analyzing methods. This product is a
breakthrough of conventional closed-circuit grinding system in
application of the two-classification theory of “coarse and fine
powders”, which divides the materials into “Three” classifications,
i.e. large, medium-sized and small powders. The product system has
the advantages of simple configuration and low investment, and it
can increase amounts of mill output greatly. With unique internal
structure, high efficiency of powder concentration, remarkable
energy saving effect, it is the prime product to improve product
yield and quality of the grinding system after the implementation
of the new cement standards, which leads the new wave of
technological innovation related to powder concentration.
Technical Features:
Compared to traditional powder classifiers, T-Sepax high-efficiency
three-classification powder classifier has the following
outstanding advantages:
1. Divide the materials into three classifications, i.e. “the large
powder (d>150um), the medium-sized powder (60um 2.Compared with
the centrifugal, tornado, rotor classifier of the similar size,
T-Sepax high-efficiency three-classification powder classifier, in
contrast with classifiers in the respect of treatment capacity, has
greatly increased the treatment capacity and classifying
efficiency, thus more in tune with the needs of large-scale
production. The advanced and reasonable structure allows the
classifying airflow, production and feed volume to change in a
large range without affecting the classifying efficiency. The
classification performance is very stable.
3. The classification theory is advanced. Combining with various
classification principles, O-X high-efficiency vortex combined
powder classifier applies aviation aerodynamic analyzing method to
optimize the design of the entire flow field, making the device
resistance significantly reduced, so the energy-saving effect is
very obvious. The classifier rotor is equipped with the vortex
rectifier with national patent, and relative to the rotor, the
airflow inside the rotor does not spin but only go up. After the
airflow enters into the motor, because of the momentum, the drive
for the motor is reduced, thus saving the drive power and reducing
the wear and tear. After the materials have been classified for
twice, the classification precision is higher.
4. The classifier shaft adopts the stepless speed control. The
adjustment of fineness is convenient, sensitive and reliable, and
the adjustment range is wide.
5. It has re-optimized the design of the classifying zone, enhanced
the spatial range of the areas, made full use of the main space to
increase the ratio of powder and air and improved the classifying
efficiency.
6. The wearing parts and components of the classifier, such as the
scattering reel, cyclone snail horn, countervanes and rotor
classifying blades are all made from wear resistant materials or
processed by wear-resistant techniques, so the wear rate is very
low. It uses the new manganese plate as the lining, which
effectively extends its service life.
7. Adopt a new design program to seal the lowering bearing of the
spindle, which is an effective solution to the two important
problems, i.e. the bearing dust pollution and lubrication oil
leakage, and meanwhile effectively extends the life of the lowering
bearing.
8. When designing the foundation of the classifier, apply
mechanical vibration attenuation theory so that the resonant
frequency of the classifier and the foundation is not close to the
natural frequency of the classifier and natural frequency of the
foundation, which is a fundamental solution to the classifier
vibration problem that has long troubled the using
manufacturers.
9. The large powder pipe, the medium-sized powder pipe and the
cyclones all adopt dual interlocking air valve, which significantly
lowers the air leakage rate of the system, thus overcoming the
major defects of raising too many dusts in the operation of the
previous classifiers.
Model |
Product fineness 0.08% |
Air volume(m³/h) |
Rotary speed(rpm) |
otor power (kw) |
Max treatment volume(t/h) |
Output(t/h) |
TS-1 |
0-3 |
16000 |
250-500 |
15 |
50 |
10-18 |
TS-2 |
0-3 |
22000 |
220-450 |
18.5 |
90 |
15-28 |
TS-3 |
0-3 |
30000 |
180-400 |
22 |
120 |
20-40 |
TS-4 |
0-3 |
45000 |
160-340 |
30 |
150 |
30-50 |
TS-5 |
0-3 |
60000 |
130-300 |
30 |
210 |
40-70 |
TS-6 |
0-3 |
75000 |
130-260 |
37 |
260 |
50-85 |
TS-7 |
0-3 |
95000 |
120-240 |
45 |
330 |
75-110 |
TS-8 |
0-3 |
120000 |
110-200 |
55 |
400 |
95-130 |
TS-9 |
0-3 |
150000 |
110-180 |
75 |
500 |
110-160 |
TS-10 |
0-3 |
180000 |
100-180 |
90 |
580 |
110-160 |
TS-11 |
0-3 |
210000 |
100-170 |
110 |
680 |
130-190 |
TS-12 |
0-3 |
240000 |
100-170 |
132 |
760 |
175-250 |
Country: | China |
Model No: | SHMG14091TRADEKEY |
FOB Price: | 5000 / Set Get Latest Price |
Place of Origin: | - |
Price for Minimum Order: | 5000 per Set |
Minimum Order Quantity: | 1 Set |
Packaging Detail: | Standard package suitable for shipment |
Delivery Time: | 35DAYS |
Supplying Ability: | 100 Set per Week |
Payment Type: | - |
Product Group : | Construction Materials Making Machinery |